Magewell Pro Convert AES67 User Manual Download Page 29

Page: 29 / 67

Modifying a Session

Click the chosen session from the left panel of the tab, modify specified
parameters, and click

Apply

after modification.

Deleting a Session

Hover your mouse over the session to be deleted, and click the

icon

appeared, then confirm your delete in the prompt window.

Starting a Session

Turn on the switch to start the streaming to Icecast. Make sure the Icecast
server is up and running.

Checking Session Status

You can check the icecast connection status at the Presets list.

Copy NDI TX Stream Name

Click on the copy icon

, then the current stream name is copied

successfully.

Setting OPTIONS
Discovery server

specify the IP address of the receiver server running discovery

service function when

Discovery server

is toggled on.

IP Address

shows the IP Address of the backup NDI channel.

The failover IP Address is automatically obtained after you select the
backup NDI source.

■

Receiver web control

This function is enabled by default. We recommend

you keep it on, because you cannot open the Web UI by clicking the gear
icon in the NDI Studio Monitor if this function is disabled.

■

click to save your modifications.

■

Summary of Contents for Pro Convert AES67




































































Search results

Summary of Contents for Pro Convert AES67

Reviews:

Brands by name

Popular brands

Magewell Pro Convert AES67, User Manual

Search results

Summary of Contents for Pro Convert AES67

Reviews:

Brands by name

Popular brands