Configuring Icecast RX Session
Click and enter
Stream > Icecast > RX
tab.
Presets
shows saved stream sessions. Up to 4 sessions are supported.
Adding/Modifying a RX Session
Click
Add
or the edit icon
, and set the parameters in the prompt window.
Deleting a Session
Click the delete icon
at the end of the target session line and confim your
delete in the prompt window.
Starting a Session
Turn on the switch to start the streaming to Icecast. Make sure the Icecast
server is up and running.
Checking Session Status
You can check the icecast connection status at the Presets list.
Name
: specify a session name.
The range is from 1 to 32 characters including A-Z, a-z, 0-9 and _-.
■
Server URL
: specify a domain name or IP address of an icecast server to
receive from.
■
Stream list
shows icecast flows that sent by your specified
Server URL
.
■
Headroom
: Options are 0dB(default), -6dB, -14dB(EBU), and -20dB(SMPTE).
■
Buffer duration
ranges from 31 to 1000ms and the default value is 500ms.
■
Sample rate
: 44.1, 48, and 96KHz are supported.
■
Codec
: L16 is supported.
■
Channels
: the deivce supports to receive up to 4-channel icecast streams.
■
Click
OK
after configuration.
■
35
Summary of Contents for Pro Convert AES67
Page 1: ......
Page 61: ...Figure3 Linux Terminal Figure4 Mac Network 61 ...