Setting NDI RX Sessions
Presets
shows saved stream sessions. Up to 4 sessions are supported.
®
To add an NDI source discovered by the converter automatically
1. Click
Add
.
2. Set the following parameters in the
Auto Discover
tab.
■
Buffer duration
ranges from 31 to 120 ms, and the default value is
60ms. We recommend that the buffer time should be longer than
current network jitter. For example, current session
Status
shows
Connected(30ms). The current network jitter is 30ms, then the
buffer time should be greater than 30ms to get a smooth NDI flow.
Lower buffer settings produce lower latency but will require more
resources. Generally, the use of default value is recomended.
■
The auto-detected NDI sources are listed below
Buffer duration
.
Select the target stream and click
Save as preset
to add it to the
preset list.
■
To add an NDI source manually
1. Click
Add
.
2. Set the following parameters in the
Accurate Add
tab.
■
Alias:
Specify an alias name (1-64 characters, including A to Z, a to
z, numbers and _-#()% ) for current preset task for your
convenience of the presets management, which will be displayed in
the presets.
■
Name:
Enter the steam name of ndi source, which is case
insensitive.
■
URL:
Enter the steam address of ndi source formed like
ip-
■
30
Summary of Contents for Pro Convert AES67
Page 1: ......
Page 61: ...Figure3 Linux Terminal Figure4 Mac Network 61 ...