24
MAGENTA MONDO MATRIX
CHAPTER 5: Commands
5. Commands, cont.
General Commands (cont):
D = Displays entire crosspoint map of the system
Displays format of xxx Vyyy A zzz
Where xxx is output number, Vyyy is UTP pairs 1,2,3 and Azzz is UTP pair 4
#D = Extended Crosspoint map of the system
Switch will respond with a list of outputs and the inputs connected to them:
zzz Rvvv Gwww Bxxx Ayyy
Where:
Zzz = Output number
vvv = "Red" channel Input assignment (UTP pair 2)
www = "Green" channel Input assignment (UTP pair 3)
xxx = "Blue" channel Input assignment (UTP pair 1)
yyy = "Audio / Aux." channel Input assignment (UTP pair 4)
#Dzzz = Report a single output cross point (M3 only)
Switch will respond with a list of inputs connected to the specified output (zzz):
zzz Rvvv Gwww Bxxx Ayyy
Where:
zzz = Output number specified
vvv = "Red" channel Input assignment (UTP pair 2)
www = "Green" channel Input assignment (UTP pair 3)
xxx = "Blue" channel Input assignment (UTP pair 1)
yyy = "Audio / Aux." channel Input assignment (UTP pair 4)
#M = Cross-point map of selected Input / source
#Maaa(Enter)
Switch will respond with a list of outputs that are connected to the selected input:
zzz Vxxx Ayyy
Where:
aaa = Input
xxx = Video Input assignment
yyy = Audio / Aux. input assignment
zzz = Output
Since it is possible to route video and audio / aux. signals separately, the reply
must be analyzed to determine exactly which signals are routed to the selected input. The output will
only be included in the list if one or both signals are routed to the selected input.
If no outputs are assigned to the selected input, the switch will issue the ready
prompt only (OK>).
#T = Report Temperature in Celsius (Master frame only.)
22
Summary of Contents for Mondo III Matrix
Page 1: ...1 Mondo III Matrix Installation Setup Guide...
Page 43: ...43 41 NOTES...
