.
27
5. Commands, cont.
Batch Routing Commands:
E = Both Video and Audio
F = Video Only (UTP pairs 1,2,3)
G = Audio Only (UTP pair 4)
EE = Take (Execute Batch Commands)
Parameters:
xxx = Output
yyy = Input (If yyy=0 then the output will be turned off)
Examples:
Exxxyyy<CR>
E1211<CR>F1112<CR>G1405<CR>F0812<CR>EE<CR>
As a batch do the following after receiving the EE command:
Route Both Audio and Video from Input 11 to Output 12 [E1211]
Route Video Only from Input 12 to Output 11 [F1112]
Route Audio Only from Input 05 to Output 14 [G1405]
Route Video Only from Input 12 to Output 08 [F0812]
Execute [EE]
#R = Red Channel (1st Pair)
#G = Green Channel (2nd Pair)
#B = Blue Channel (3rd Pair)
#A = Auxilliary Channel (4th Pair)
EE = Take (Execute Batch Commands)
Parameters:
xxx = Output
yyy = Input (If yyy=0 then the output will be turned off)
Examples:
#Rxxxyyy<CR> Or #Gxxxyyy<CR> Or #Bxxxyyy<CR> Or #Axxxyyy<CR>
#R11<CR>#G11<CR> #B11<CR>EE<CR>
As a batch do the following after receiving the EE command:
Route Red Channel Input 1 to Red Channel Output 1
Route Green Channel Input 1 to Green Channel Output 1
Route Blue Channel Input 1 to Blue Channel Output 1
Execute [EE]
#R0116(Enter)#G0116(Enter)#B10(Enter)#A10(Enter)EE(Enter)
As a batch do the following after receiving the EE command:
Route Red Channel Input 16 to Red Channel Output 1
Route Green Channel Input 16 to Green Channel Output 1
Turn Blue Channel Output 1 OFF
Turn Auxilliary Channel Output 1 OFF
Execute [EE]
25
Summary of Contents for Mondo III Matrix
Page 1: ...1 Mondo III Matrix Installation Setup Guide...
Page 43: ...43 41 NOTES...
