Maestro E228, User Manual

Page: 86 / 260

MAESTRO WIRELESS SOLUTIONS | Network
85
E SERIES | USER MANUAL VERSION 2.2.0 http://support.maestro-wireless.com
B. Interface Protocols
The Protocol configuration on the Interface General Settings page
allows configuring the protocol with respect to the router model number.
The available protocol options are as below and please make sure that
you select an appropriate protocol as mentioned in the table below for
the selected interface.
Interface

Protocols

LAN WAN WWAN Cellular
CELLDHC
P (E206)
Static
Address
    
DHCP
Client
    
PPPoE
    
PPPoAT
M
    
UMTS /
GPRS
    
CELLULA
R
(E206)
    
Note
 For E206 only, the cellular interface is separated between two
interfaces: CELLDHCP and “CELLULAR”. CELLDHCP is
managing local connection with cellular module inside the
router.
Parameters Description
Static address
IPv4 address – Enter the IPv4
Address. This IP Address must be used
to access the Router. The default IP
Address is 198.162.1.1 for LAN.
IPv4 Netmask – Select the IPv4
Netmask.
IPv4 Gateway – Enter the IPv4
Address for Gateway.
In case of LAN, if you do not provide any
Gateway IP Address, by default it will take
the same IP Address as that of the IPv4 LAN
IP Address (192.168.1.1).
For WAN, enter the IP Address of WAN
gateway.