MAESTRO WIRELESS SOLUTIONS
| Network
108
E SERIES | USER MANUAL VERSION 2.2.0
http://support.maestro-wireless.com
-management
configuration.
Use
broadcast
flag
Check to use the broadcast flag.
This flag is generally used by the ISP‟s.
Use
default
gateway
Click to configure a default gateway route.
None of the gateway routes are configured
by default.
Use DNS server
advertised
by
peer
Allows advertising the DNS server address.
Use DNS server advertised by peer for WAN
interface is checked by default.
If unchecked, the advertised DNS server
addresses are ignored.
Use
gateway
metric
Enter the gateway metric. It ensures a
separate routing entry for the respective
interface in the main routing table.
The default metric is 3.
Client ID to send
when requesting
DHCP
Enter the Client ID that shall be sent when
requesting DHCP.
Vendor Class to
send
when
requesting
DHCP
To allocate DHCP IP Addresses based on
Vendor Class.
Override
MAC
address
Click to override the default MAC Address
for the WAN Interface.
On factory reset, it will be set to default
MAC address.
Overrride MTU
Click to override the default MTU value
(Maximum Transmission Unit)
The default MTU is 1500.
Table 11.1-13: Advanced Configurations of WAN Interface
