MAESTRO WIRELESS SOLUTIONS
| Network
100
E SERIES | USER MANUAL VERSION 2.2.0
http://support.maestro-wireless.com
by default.
Use builtin IPv6
-management
Allows to use the built in IPv6 management
configuration.
Enable
IPv6
negotiation
on
PPP link
Click to enable IPv6 negotiation on PPP link.
Modem
init
timeout
Enter the maximum wait time in seconds for
the modem to become ready.
The default modem initiation timeout 20
seconds.
Use
default
gateway
Click to configure a default gateway route.
None of the gateway routes are configured
by default.
Use
gateway
metric
Enter the gateway metric.
The default metric is 1.
Use DNS server
advertised
by
peer
Allows the router to advertise the DNS
server address.
Use DNS server advertised by peer for 3G
interface is checked by default.
LCP echo failure
threshold
Presume peer to be dead after configured
LCP echo failures. Use 0 to ignore failures.
LCP
echo
interval
This is time the router should wait before
sending an echo request to check whether
the link is alive or not.
The LCP echo interval by default is 20
seconds.
Inactivity
timeout
The Router will wait for the LCP echo
request response for the LCP Echo interval
defined after every attempt. It declares LCP
link as closed if it does not receive response
after this defined period of attempts
Use 0 seconds to persist the connection.
Table 11.1-7: Advance Configuration of CELLDHCP Interface
