MAESTRO WIRELESS SOLUTIONS
| Network
184
E SERIES | USER MANUAL VERSION 2.2.0
http://support.maestro-wireless.com
fine grained control over the Source IP Address used for
outgoing traffic.
Name
Displays the name of the Source NAT rule.
Match
Displays the details of the Source NAT Rule
configuration and the conditions in which
the rule is applicable.
Action
Action to be taken on the Source NAT when
the rule conditions are satisfied.
Enable
Check to enable the Source NAT Rule.
Sort
Click
to sort the configured Source
NAT Rule.
New source NAT
Name
Enter the name of the New source NAT.
Source zone
Select the source zone.
Destination zone
Select the destination zone.
Note
Destination Zone must not be
same as the Source Zone.
To source IP
Select the source IP Address.
To source port
Select the source port.
Table 11.9-5: Traffic Rule Overview for Firewall Zone
What can be achieved out of Traffic Rules
Block / redirect generic data types for example: ICMP, DHCP requests etc.
Block certain MAC addresses on the LAN side
Block communication with one or more public IP addresses
Block communication with all except one or more IP address
Open specific ports on WAN side
DMZ rules and zone creation
