Macurco CD-6B Manual (Rev-1.0) Eng
REV – 1.0
[34-2900-0510-2 ]
19
|
P a g e
9.
Push
Enter
to return to normal operation.
4.8.9
Select Alarm 2 Relay Setting – “A2S”
Available options are “diS”, 0.25, 0.50, 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 4.50, 5.00.
To select the Alarm 2 Relay Setting, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
2.
Push the
Enter
button to enter the Con menu.
3.
Push
Next
8 times to get to “A2S” or Alarm 2 Relay Setting.
4.
Push
Enter
. The display will show the current setting.
5.
Push
Next
to cycle through the available settings (display will begin flashing).
6.
Push
Enter
to confirm the new setting (display will stop flashing).
7.
Push
Enter
once more to return to the configuration menu.
8.
Push
Next
until “End” is displayed.
9.
Push
Enter
to return to normal operation.
4.8.10
Select Alarm 2 Relay Configuration – “A2c”
Available options are “nO”, “nC”.
To select the Alarm 2 Relay Configuration, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
2.
Push the
Enter
button to enter the Con menu.
3.
Push
Next
9 times to get to “A2c” or Alarm 2 Relay Configuration.
4.
Push
Enter
. The display will show the current setting.
5.
Push
Next
to cycle through the available settings (display will begin flashing).
6.
Push
Enter
to confirm the new setting (display will stop flashing).
7.
Push
Enter
once more to return to the configuration menu.
8.
Push
Next
until “End” is displayed.
9.
Push
Enter
to return to normal operation.
4.8.11
Select Alarm 2 Relay Latching – “A2L”
Available options are “OFF”, “On”.
To select the Alarm 2 Relay Latching configuration, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
2.
Push the
Enter
button to enter the Con menu.
3.
Push
Next
10 times to get to “A2L” or Alarm2 Relay Latching.
4.
Push
Enter
. The display will show the current setting.
5.
Push
Next
to cycle through the available settings (display will begin flashing).
6.
Push
Enter
to confirm the new setting (display will stop flashing).
7.
Push
Enter
once more to return to the configuration menu.
8.
Push
Next
until “End” is displayed.
9.
Push
Enter
to return to normal operation.
Summary of Contents for CD-6B
