MACROMEDIA HOMESITE, Using Manual, Page: 173 / 358

Setting up a debugging session 153
Setting up a debugging session
These are the tasks that you perform to set up a debugging session:
•
Select or configure a RDS server against which to run a debugging session.
•
Specify server, file, and browser mappings so that H for Dreamweaver
MX can locate the ColdFusion development server and the files to debug.
The following procedure describes these tasks. For more information, see “Working
with files on remote servers” on page 14 .
To set up a debugging session:
1 In the Options > Settings > File Settings > FTP & RDS pane, select the Enable
Explorer shell integration option, if it is not already selected.
2 Open an application page.
3 Select Debug > Debug Settings .
The Remote Development Settings dialog box appears:
4 If ColdFusion Server is installed on the same computer as H for
Dreamweaver MX, select the server in the Debug on RDS Server box, on the
Debug Start tab.
5 If ColdFusion Server is not installed on the same computer as H for
Dreamweaver MX, perform the following steps:
a On the Debug Start tab, in the Debug on RDS Server box, select Add RDS
Server.