Mackie DL806, Reference Manual

Page: 79 / 160

Mackie DL806 and DL1608 Reference Guide
79
Zeroing the GEQ
Imagine how long it might take to reset each of the 31 bands on the graphic EQ to ±0 dB. The factory
default preset for graphic EQ will do that for you in a few easy steps. First, you should already be on the
graphics EQ view; if you’re reading this chapter, I gather that you’re already there! Now (1) tap the presets
button in the upper-right corner of the iPad, (2) once there, make sure the “GEQ” button (not the “Output”
button) is green, then (3) tap the factory default button, (4) tap recall, and (5) tap the yes button. Done!
A lot more information about presets starts on page 104.
Graphic EQ at a Glance
Parameter Low Value High Value Default
GEQ ENABLE OFF ON OFF
20 Hz Gain –12 dB 12 dB 0 dB
25 Hz Gain –12 dB 12 dB 0 dB
31.5 Hz Gain –12 dB 12 dB 0 dB
40 Hz Gain –12 dB 12 dB 0 dB
50 Hz Gain –12 dB 12 dB 0 dB
63 Hz Gain –12 dB 12 dB 0 dB
80 Hz Gain –12 dB 12 dB 0 dB
100 Hz Gain –12 dB 12 dB 0 dB
125 Hz Gain –12 dB 12 dB 0 dB
160 Hz Gain –12 dB 12 dB 0 dB
200 Hz Gain –12 dB 12 dB 0 dB
250 Hz Gain –12 dB 12 dB 0 dB
315 Hz Gain –12 dB 12 dB 0 dB
400 Hz Gain –12 dB 12 dB 0 dB
500 Hz Gain –12 dB 12 dB 0 dB
630 Hz Gain –12 dB 12 dB 0 dB
800 Hz Gain –12 dB 12 dB 0 dB
1 kHz Gain –12 dB 12 dB 0 dB
1.25 kHz Gain –12 dB 12 dB 0 dB
1.6 kHz Gain –12 dB 12 dB 0 dB
2 kHz Gain –12 dB 12 dB 0 dB
2.5 kHz Gain –12 dB 12 dB 0 dB
3.15 kHz Gain –12 dB 12 dB 0 dB
4 kHz Gain –12 dB 12 dB 0 dB
5 kHz Gain –12 dB 12 dB 0 dB
6.3 kHz Gain –12 dB 12 dB 0 dB
8 kHz Gain –12 dB 12 dB 0 dB
10 kHz Gain –12 dB 12 dB 0 dB
12.5 kHz Gain –12 dB 12 dB 0 dB
16 kHz Gain –12 dB 12 dB 0 dB
20 kHz Gain –12 dB 12 dB 0 dB
Master –12 dB 12 dB 0 dB