Mackie DL806 Reference Manual Download

Page: 146 / 160

Mackie DL806 and DL1608 Reference Guide

146

Version 1.3

The following is a list of items that have been added, changed or fixed since Version 1.2.

Wireless support for iPad (4th generation) and iPad mini

Master Fader now officially supports wireless operation with iPad (4th generation) and iPad mini.

Retina Ready

All graphics have been updated to full retina resolution for use with a retina iPad (3rd or 4th generation).

Access Limits

[pages 91-93 of the Reference Guide]

Access Limits have been added to the Tools > Settings screen. This set of buttons allows you to limit access to

a variety of controls on each iPad.

When limited, the user cannot access those controls.

A passcode may be set to ensure that no changes will be made.

Summary of Contents for DL806

































































































































































Search results

Summary of Contents for DL806

Reviews:

Related manuals for DL806

Brands by name

Popular brands

Mackie DL806, Reference Manual

Search results

Summary of Contents for DL806

Reviews:

Related manuals for DL806

Brands by name

Popular brands