Mackie DL806 Reference Manual Download

Page: 147 / 160

Mackie DL806 and DL1608 Reference Guide

147

Added 2X Graphic EQ Zoom

[page 78 of the Reference Guide]

A new 2X zoom button has been added to the graphic EQ. This allows you to zoom in on the GEQ, perfect for

our friends with sausage fingers and/or mixing with the iPad mini. Swipe left and right to view and adjust the

remaining bands. Note that draw is unavailable when in 2X mode.

Scrolling name

• Page 39 – Channel ID Button

• Page 49 – Master ID Button

• Page 83 – Current Parameter Display

• Page 97 – Snapshot List

• Page 104 – Presets

If the name is too long to fit, the button scrolls, displaying the entire name.

Reverb and Delay images

[pages 70-76 of the Reference Guide]

When selecting a new reverb or delay type, an image will be displayed to reflect the chosen effect type.

Bug fixes and stability improvements

Summary of Contents for DL806

































































































































































Search results

Summary of Contents for DL806

Reviews:

Related manuals for DL806

Brands by name

Popular brands

Mackie DL806, Reference Manual

Search results

Summary of Contents for DL806

Reviews:

Related manuals for DL806

Brands by name

Popular brands