215981
60
Revision A
4.2
Performing Operational Checks
Once the predelivery checklist has been completed, the operating characteristics of the windrower will need to be
inspected.
1.
Perform the operational check procedures provided in this chapter and fill out the relevant items in the
Predelivery Checklist, page 149
.
2.
Ensure that the Operator or the Dealer retains the completed Predelivery Checklist.
For information on navigating the windrower
’
s Harvest Performance Tracket (HPT), refer to
.
4.2.1
Checking Operating Safety System
The operating safety system protects the Operator from injury and the windrower from damage. The functionality of the
operating safety system will need to be verified.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
DANGER
Ensure that all bystanders have cleared the area.
1.
With the engine running and the seat base in engine-forward mode, press the HEADER ENGAGE switch. Confirm that
the header drive does
NOT
engage and that the Harvest Performance Tracker (HPT) displays LOCK SEAT BASE IN CAB-
FORWARD.
2.
With the engine running and the seat base in cab-forward mode, stand up and engage the HEADER DRIVE switch. The
header drive should
NOT
engage and the HPT should display OPERATOR MUST BE SEATED.
3.
With the engine running and the seat base unlocked, move the ground speed lever (GSL) out of PARK. Confirm that the
engine immediately shuts down and that the HPT displays LOCK SEAT BASE and sounds a tone.
4.
Shut down the engine and press the HEADER ENGAGE switch. Try starting the engine to confirm that the HPT displays
DISENGAGE HEADER. If the engine turns over, the safety system requires adjustment. Refer to the windrower
’
s
technical manual for the adjustment procedures.
5.
Shut down the engine and open the cooler box door. Try starting the engine to confirm that the HPT displays CLOSE
COOLER BOX DOOR. If the engine turns over, the safety system requires adjustment. Refer to the windrower
’
s
technical manual for the adjustment procedures.
