215981
95
Revision A
1000754
A
B
Figure 5.34: Header Leg
4.
Remove hairpin (A) from pin (B), and remove pin (B) from
the header leg. Repeat this step on the opposite header leg.
DANGER
Ensure that all bystanders have cleared the area.
5.
Start the engine.
1033580
A
Figure 5.35: Header Float Springs
6.
If the header lift legs will be lowered WITH a header or
weight box attached
, proceed to Step
If the header lift legs will be lowered WITHOUT a header
or weight box attached to the windrower
, fully release the
tension in header float springs (A):
•
If the Harvest Performance Tracker (HPT) displays a
message saying that the float should be removed, then
remove the float and proceed to Step
•
If the HPT does
NOT
display a message saying that the
float should be removed, then proceed to Step
to remove the float manually.
IMPORTANT:
To lower the header lift legs without a header or weight
box attached to the windrower, ensure that the tension on
the float springs is fully released. This will prevent damage
to the header lift linkages.