MacDon M1170 Unloading And Assembly Instructions Download

Page: 158 / 160

215981

150

Revision A

Item

Reference

Ensure that the interior lights are functioning properly.

4.2.11 Checking Interior Lights, page 75

Ensure that the exterior lights are functioning properly.

4.2.9 Checking Exterior Lights, page 70

Ensure that the hazard and the signal lights are
functioning properly.

4.2.9 Checking Exterior Lights, page 70

Ensure that the beacons are functioning properly (if these are
installed).

4.2.9 Checking Exterior Lights, page 70

Complete the header

’

s Predelivery Checklist (if applicable).

—

Ensure that the manuals are in the windrower

’

s manual case.

4.3 Checking Manuals, page 79

Remove the plastic coverings and windshield decal from
the cab.

4.4 Performing Final Steps, page 80

Date Checked:

Checked by:

REFERENCE

Summary of Contents for M1170

































































































































































Search results

Summary of Contents for M1170

Reviews:

Related manuals for M1170

Brands by name

Popular brands

MacDon M1170, Unloading And Assembly Instructions

Search results

Summary of Contents for M1170

Reviews:

Related manuals for M1170

Brands by name

Popular brands