5.
Retrieve draper drive and reel control multicoupler (A)
from hose management arm.
6.
Push knob (B) on hydraulic receptacle and pull
handle (C) fully away from windrower.
7.
Open cover (D) and position coupler onto receptacle.
Align pins in coupler with slots in handle (C) and push
handle toward windrower so that coupler is locked onto
receptacle and knob (B) snaps out.
8.
Remove cover from electrical connector (E), push
electrical connector onto receptacles, and secure by
turning collar on electrical connector clockwise.
Figure 3.43: Draper/Reel Multicoupler
9.
Retrieve knife and reel drive multicoupler (A) from hose
management arm.
10. Push knob (B) on hydraulic receptacle and pull
handle (C) fully away from windrower.
11. Open cover (D) and position coupler onto receptacle.
Align pins in coupler with slots in handle (C) and push
handle toward windrower so that coupler is locked onto
receptacle and knob (B) snaps out.
Figure 3.44: Knife/Reel Drive Multicoupler
12. Push latch (B) to unlock the platform (A).
13. Push the platform (B) towards the cab until it stops and
latch engages.
Figure 3.45: Platform
214017
34
Revision A
