19. Disengage safety prop by turning lever (A) downward
to raise prop until lever locks into vertical position.
NOTE:
If safety prop will not disengage, raise header to
release the prop.
20. Repeat for opposite side.
Figure 3.25: Cylinder Safety Prop
CAUTION
Check to be sure all bystanders have cleared the area.
21. Start engine and press HEADER DOWN switch (A) on
GSL to fully lower header.
22. Stop engine and remove key.
Figure 3.26: GSL
3.3.2
Hydraulic Link with Optional Self-Alignment Kit
The following connection procedure applies to M1240 windrowers hydraulic center-link with the optional
self-alignment kit installed.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1.
Stop windrower engine and remove key from ignition.
214017
27
Revision A
