Maintenance and lubrication
50
“Driven” gearbox, if the “driving” gearbox
is fixed in the lower position.
“Driven” gearbox, if the “driving” gearbox
is fixed in the upper position.
The location of the breather also depends on the final position of the gearbox. It is
important that the breather is placed on the hole over the theoretic oil level (prefera-
bly).
11.6 Drive connecting elements
11.6.1 Cardan shaft
•
The cardan shafts have a 250 hours inspection period
•
check the cardan shafts and the cross shafts of the beginning of every season, if
necessary grease the sliding surfaces
11.6.2 Chain clutches and other designed clutches
•
requires seasonal lubrication
11.7 Snapping unit
11.7.1 Gearbox
Snapping unit gearbox
chopper gearbox
SAE 80W-140 lubricating oil -
0,26 kg (0,3 l)
EP-00 (fluid) grease
2,5 kg (2,5 l)
-
Oil level check
Beginning of every sea-
son, or detecting oil spill
50 hours, or detecting oil
spill
Check every day the gearbox, to detect leakage, or oil flow which may cause failure!
Summary of Contents for C Series
