Setup procedure and adjustment of the corn head
39
Place the removed parts in a box and place between them bubble wrap!
WARNING!
The adapter primary function is corn harvesting. Using the sun-
flower kit is only recommended in small area (0-50h/year). Har-
vesting greater quantity will cause considerably faster degrada-
tion (mainly the plastic covers are affected), the manufacturer
doesn’t take any responsibility for damage originating from ir-
regular usage of the adapter!
Install the sunflower kit the way it’s
shown on the figure, using 4 pcs of
countersunk-head bolt!
M10
Countersunk-head
bolt
Install the chain tensioner and
gathering chain again the way it’s
show on the figure!
Put a retaining ring on the spring,
and then secure the ring
80 mm
from the bottom of the spring!
During the installation of the gath-
ering chain make sure that the
lugs are equal distance away from
each other, and that the chain is at
a correct position on the sprocket!
Summary of Contents for C Series
