MacDon C Series, Operator'S Manual

Page: 25 / 70

Mounting the corn head on the combine
24
7. Remove the chain on the right side of the feeder house (9).
8. From the beater (10) remove the safety switch (11) and the holding clamps.
9. From the feeder house frame remove the cover plate (12).
10. From the feeder house right side remove the beater’s (10) bracket (13).
11. Holding the beater, unscrew the 3-3 bolts on the left and right (14; 15) which are
holding the bearing house.
12. Remove the beaters (10) with the bearing house (16; 17) from the feeder houses
frame.
13. On the removed grain beaters place (10) mount the corn beater fingers (18),
together with the protective plates (19; 20).
14. Mount the bracket on the right side of the feeder house (21).
15. Mount on the feeder houses right side 2 bolts (14), which had previously been
removed, along with the protective plates (19; 20).
16. On the corn beaters mount the previously removed bracket (13).
17. The corn feeder has to be installed in the bearing housing in a way that the
beaters during rotation cannot reach the feeder house.
18. Mount the previously removed safety clutch and chain (9; 11).
19. Mount the previously removed safety plate (12).
20. Lift the frame (6) and lock it with the hooks (1).
21. Connect back to the frame the tension rods (7; 8), and the springs (5).
22. Tension the spring tensioners (2; 3; 4) by the measured dimensions.