Mounting the corn head on the combine
18
6 Mounting the corn head on the combine
After taking off the transport skids:
•
Cut off the shrink-wrap,
•
Cut the clamping, snouts must be taken down from the machine.
Remove the parking stands (and snouts if attached to corn head) from their stored
shipping position and install parking stands in their retracted (transport) position.
Carefully lower the machine to horizontal position with a cable attached to lifting
hooks.
Remove the shipping skid after the machine is resting securely in horizontal posi-
tion!
WARNING!
After the above operation and because the manufacturer al-
ready attached the specified mounting kit to the Corn Head, en-
gage and securely attach the Corn Head to the combine accord-
ing to Combine Manufacturer’s instructions. Engage the feeder
lift cylinder safety stop and secure the lower latches!
In case of foldable machines remove the screws which secured
the wings (on both sides) to the mainframe!
Summary of Contents for C Series
