UNLOADING AND ASSEMBLY
169078
12
Revision E
h. Remove lynch pin from clevis pin (C) in header
stand at right side of header.
i.
Hold stand (D), and remove clevis pin (C).
j. Invert stand (D), and re-install on header leg in
upper hole location with clevis pin (C). Secure
clevis pin (C) with lynch pin.
NOTE
In soft conditions use a wooden block
under the stand.
k. Lower header onto stand (D).
STEP 6. REMOVE SHIPPING
STANDS
a. Remove two bolts (E) from shipping stand (F).
b. Remove hairpin from pin (G).
c. Hold shipping stand (F), remove pin (G), and
remove stand. Discard stand and hardware.
d. Repeat above steps for opposite shipping stand.
e. Remove four bolts (H), and remove angle (J).
Discard angle and hardware.
C
D
C
D
F
G
E
J
H
Summary of Contents for A30-S
Page 55: ...NOTES 169078 53 Revision E ...