UNLOADING AND ASSEMBLY
169001
Revision F
33
B. SKID SHOES
a. Unpack skid shoe bundle.
b. Remove two clevis pins (A) from each skid shoe.
c. Remove nuts, bolts, and clips (B) from
skid shoe.
d. Position skid shoe below cutterbar, and insert
tabs on skid shoe into slots (C) in frame. Secure
with clevis pin (A).
e. Attach clips (B) with bolts and nuts removed at
step c. to secure skid shoe to cutterbar.
NOTE
Use a socket and ratchet wrench to
access the nuts.
f. Tighten
nuts.
g. Remove clevis pin (A), and adjust skid shoe to
desired height. Reinstall two clevis pins (A), and
secure with lynch pins.
h. Repeat above steps for opposite side. Set both
skid shoes to the same position.
C. STUB GUARDS
Refer to installation and adjustment instructions
in the kit.
C
A
B
A
B
A
Summary of Contents for A30-D
Page 49: ...NOTES 169001 Revision F 47...