UNLOADING AND ASSEMBLY
169001
Revision F
18
STEP 12. ATTACH MOWER
CONDITIONER TO
TRACTOR
CAUTION
Shut off tractor, engage parking brake and
remove key before working around hitch.
A. DRAWBAR TYPE HITCH
I.
SET UP DRAWBAR
a. Adjust tractor drawbar to meet ASAE Standard
specifications as listed below:
Dimension
1000 RPM power take off (PTO)
1.37 in. diameter
1.75 in. diameter
X
16 in. (406 mm)
20 in. (508 mm)
Y
6–12 in. (152–305 mm)
8 in. (203 mm) recommended
Z
13–17 in. (330–432 mm)
16 in. (406 mm) recommended
IMPORTANT
Improper drawbar length can cause
driveline vibration and premature wear on
the pump and gearbox.
II. ATTACH DRAWBAR EXTENSION
a. Secure tractor drawbar so the hitch-pin hole is
directly below the driveline.
b. Loosen bolts (B) on extension assembly (A), and
slide onto drawbar.
c. Install pin (C) through drawbar and extension
from underside, and secure with hairpin.
d.
Gradually tighten the four bolts to
265 ft·lbf (359 N·m).
e. Attach the swivel
Articulating Power Tongue
(APT)
member (D) with pin (E) onto the APT.
f. Secure pin with clevis pin (F), washers, and
cotter pin.
(continued next page)
E
D
A
C
B
F
Y
Z
Tractor
drawbar
PTO
X
Ground
Summary of Contents for A30-D
Page 49: ...NOTES 169001 Revision F 47...
