UNLOADING AND ASSEMBLY
169001
Revision F
32
STEP 23. INSTALL OPTIONS
A. GAUGE ROLLERS
a. Unpack gauge roller bundle.
b.
Remove two locking pins (A) from
each assembly.
c.
Remove nuts, bolts, and clips (B)
from assembly.
d. Insert tabs on roller assembly into slots (C) on
cutterbar at outboard mounting locations on
frame, and secure to support bracket with
locking pin (A) at lowest position.
e. Attach clips (B) with bolts and nuts removed at
step c. to secure roller assembly to cutterbar.
f. Tighten
nuts.
NOTE
Use a socket and ratchet wrench to
access the nuts.
g. Remove locking pin (A), and adjust rollers to
desired height. Reinstall both locking pins (A).
h. Ensure that nut (D) on each pin registers in
adjacent hole in support bracket.
i. Secure pins with hairpins (E).
j. Repeat above steps for opposite side. Set both
gauge rollers to the same position.
B
A
C
B
A
A
E
D
Summary of Contents for A30-D
Page 49: ...NOTES 169001 Revision F 47...
