35
I
n
m
ore
d
etai
l...
Inner flange
Outer flange
6. Use the Allen key to loosen the screw counter-clockwise. Remove the outer
flange and the saw blade. (Refer to Fig .26 & Fig. 27)
7. Clean both flanges and replace the saw blade.
8. Replace the outer flange in such way that the slaving pins sit in the recesses
of the inner flange.
9. Press and hold the shaft lock and tighten the screw. Press the plunge lock
button (1) for the casing to swivel up again.
Saw blade
Output spindle
Screw
Fig. 27
Brush replacement
The saw is equipped with self-isolating special brushes. They are automatically
isolated when worn, and the tool stops.
Check the carbon brushes regularly. Replace the carbon brushes with genuine
spare parts if either brush is worn to less than 6mm long.
MSPS1200 by MACAllister
Cleaning and maintenance
NOTE :
The rotation direction arrows of saw blade and saw must be
aligned!
NOTE :
The carbon brushes must be replaced by a pair of similar
carbon brush available through the after-sales service organization or
qualified professional person.
Summary of Contents for MSPS1200
Page 42: ......
