15
MSPS1200 by MACAllister
Before you start
12
13
4
Fig.5
Track pack
The track pack includes:
x 7
2
2
1
00mm lengths of track for optimum performance of the plunge saw
x track connectors (Note: each connector consists of two parts)
x 3mm hex key
NOTE :
When accuracy is critical, use a set square (not provided) to
check the angle and make test cuts on a scrap piece of material.
Get
ting
st
arted
...
Set cutting angle
The plunge saw can be swiveled between 0° and 48°:
1. Loosen the front and rear bevel lock knobs (4 and 12).
2. Pivot the body of the saw until the bevel angle pointer adjacent to the front bevel
lock aligns with the bevel angle required on the bevel scale(13).
3. Tighten the bevel lock knobs firmly.
4. The saw is now secured ready for cutting at the bevel angle required.
Summary of Contents for MSPS1200
Page 42: ......
