17
MSPS1200 by MACAllister
Before you start
4.
Tighten the hex screw clockwise to secure the half of the connector connect to
the track. (Refer to Fig. 7)
5.
Now repeat this procedure, threading the second connector into the lower clamp
channel (on the underside of the track).
6.
Again, ensure the heads of the hex screws are accessible, and secure the second
connector in position by tightening the hex screw anti-clockwise (Refer to Fig. 7).
Hex screw
Hex key
d1
d2
Fig. 7
7.
Guide the free ends of the two track connectors into the clamp channels of the
second track.(Refer to Fig. 8)
d1
d2
Fig.8
Get
ting
st
arted
...
Summary of Contents for MSPS1200
Page 42: ......
