38
I
n
m
ore
d
etai
l...
Troubleshooting
Problem
Possible Causes
Likely Solutions
Device does not
work
1. Cord not connected.
2. No power at outlet.
3. Internal damage or
wear. (Carbon brushes
or Trigger, for example.)
1. Check that cord is plugged in.
2. Check power at outlet. If
outlet is unpowered, turn off tool
and check circuit breaker. If
breaker is tripped, make sure
circuit is right capacity for tool
and circuit has no other loads.
3. Have technician service tool.
Tool operates
slowly.
Forcing tool to work too
fast.
Allow tool to work at its own rate.
Excessive noise
or rattling.
Internal damage or wear.
(Carbon brushes or
bearings, for example.)
Have technician service tool.
Performance
decreases over
time.
Carbon brushes worn or
damaged.
Have qualified technician
replace brushes.
Sawing performance
is not good enough.
Saw blade is blunt?
Keep the saw blade sharp.
Replace as need..
Saw blade not suitable for
the materials?
Saw vibrates
heavily.
Saw blade distorted?
Mount the saw blade correctly.
Saw blade mounted
incorrectly?
MSPS1200 by MACAllister
Troubleshooting /
Recycling
Recycling
Meaning of crossed – out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information
regarding the collection systems available. If electrical appliances are disposed of
in landfills or dumps, hazardous substances can leak into the groundwater and get
into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to
take back your old appliance for disposals at least free of charge.
Summary of Contents for MSPS1200
Page 42: ......
