10
www.mac-srl.it
Brain_1_08 190722
GBR
RADIO CONTROL REMOTE PROGRAMMING
OPERATIONS
PICTURES
this procedure allows to guarantee a new
radio code without directly operating on the
board.
the programming operations occur all
by radio using a remote control already
programmed on the control board.
If there are more codes to be memorized,
it is necessary to repeat every time this
procedure from the beginning.
this function is available only if in the control
board are only memorized Rolling-Code
codes.
the function of the new radio code can be
selected during the programming following
the same criterion for the standard
memorisation.
1) Send a command to the control board
with a remote control IRIS RC type
already added in memory.
2) Within 8 seconds, push simultaneously
1 and 3 buttons of the IRIS RC remote
control used in the previous point.
the control board is entered into
programming.
3) Within 8 seconds, send the new radio
code of the remote control to be
memorised (Rolling-Code type).
If no code is sent, the control board exits
from the programming after 8 seconds
automatically.
4) Check that the new code memorised
perfectly works, otherwise repeat the
procedure.
3.o) RADIO / REMOTE CONTROL PROGRAMMING:
4.0 SAFETY WARNINGS FOR MAINTENANCE AND USE
WaRnInGS
These warnings are integral and essential parts of the electronics and they are to be given to the final user. So it
is necessary to keep this manual. Read carefully the instruction book which gives important indications about the
installation. the wrong installation or the improper use of the control board may be a source of serious danger.
maIntenanCe
To guarantee the efficiency of the control board professional staff must make the maintenance in times decided by
the installer, by the producer and by the legislation in force. the operations of installation, maintenance, reparation
and cleaning must be documented. this documentation is to be kept by the user.
foR tHe USeR
Read carefully the instructions and the documents enclosed. the product must be used according to the use designed
by the constructor. any other use is to be considered improper and dangerous. moreover, the information in this
document and in the enclosed documents may be modified without notice.
maC s.r.l. declines all responsibility. In
case of maintenance, cleaning, breakdown or malfunction of the product, turn off the power supply and avoid any
attempt of intervention except when indicated. Call maC s.r.l.
staff before any maintenance or sending of damaged/
broken material.
