02
|
www.m4sol.com
MS-TestPro USER GUIDE
Introduction & Why the MS-TestPro
03
Hardware
04 - 05
Optional Hardware
06 - 07
HDBaseT Support & Cabling for HDBaseT
08
GUI - Home Page
09
GUI - Display Calibration
10
MS-TestPro Setup & Testing Types
11 - 12
WiFi / LAN Connectivity
13
HDBaseT Certification Test
14 - 15
MAX ERR and MSE ERR
16
HDBaseT Performance Testing
17 - 21
Log Analyzer
22 - 23
HDMI Pattern Generator
24
EDID Analyzer
25 - 26
Report Files
27 - 28
Cloud Connectivity
29
Device Power & PoH
29
Firmware / System Upgrade
29
Specifications
30
Contents
Notices
• This MSolutions product contains electrical components that may be damaged by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of surge protection is highly recommended in order to protect and extend the life
of your equipment.
• The transmission distances of HDMI over CATx cables are measured using TE CONNECTIVITY 1427071-6 EIA/
TIA-568-B termination (T568B) of cables is recommended for optimal performance. To minimise interference of
unshielded twisted pairs in the CAT5e/6 cable, do not run the HDBaseT / CAT5e/6/6a cabling with or in close
parallel proximity to mains power cables.
• Do not substitute or use any other power supply other than the enclosed unit, or an MSolutions approved
replacement. Do not disassemble either the Tester, Transmitter, Receiver or optional Module units for any reason.
Doing so will void the manufacturer’s warranty.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• MSolutions reserves the right to change the specifications of this unit without prior notice. As a result of this,
physical representations or graphical elements contained within this user guide may not be accurate.
