M/A-Com M/A-COM P7200 Series Operator'S Manual Download Page 2 | Manualshive

Page: 2 / 64

background image

2

MANUAL REVISION HISTORY

REV

DATE

DESCRIPTION

-

Sept. 2005 Initial release.

M/A-COM Technical Publications would particularly appreciate feedback on any errors found in this
document and suggestions on how the document could be improved. Submit your comments and
suggestions to:

Wireless Systems Business Unit
M/A-COM, Inc.

fax your comments to: (434) 455-6851

Technical Publications

or

221 Jefferson Ridge Parkway

e-mail us at: [email protected]

Lynchburg, VA 24501

NOTICE!

The software contained in this device is copyrighted by M/A-COM, Inc. Unpublished rights are
reserved under the copyright laws of the United States.

This device is made under license under one or more of the following U.S. Patents: 4,590,473;
4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497;
5,164,986; 5,185,795.

The voice coding technology embodied in this product is protected by intellectual property rights
including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this
technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the
Object Code, or in any other way convert the Object Code into human-readable form.

NOTICE!

Repairs to this equipment should be made only by an authorized service technician or facility designated
by the supplier. Any repairs, alterations, or substitution of recommended parts made by the user to this
equipment not approved by the manufacturer could void the user’s authority to operate the equipment in
addition to the manufacturer’s warranty.

NOTICE!

EDACS is a registered trademark and ProScan, ProSound, and Failsoft are trademarks of M/A-COM,
Inc.

All other product and brand names are trademarks, registered trademarks, or service marks of their
respective holders.

This manual is published by

M/A-COM, Inc.

, without any warranty. Improvements and changes to this manual

necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or
equipment, may be made by

M/A-COM, Inc.

, at any time and without notice. Such changes will be

incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying and recording, for any purpose,
without the express written permission of

M/A-COM, Inc.

Copyright

©

2005 M/A-COM, Inc. All rights reserved.

«
1
2
3
4
...
»

Summary of Contents for M/A-COM P7200 Series

































































Reviews:

No comments

Related manuals for M/A-COM P7200 Series

Brand: Bush Pages: 36

Brand: BNC Pages: 14

Brand: Orbit Pages: 27

Brand: Powermate Pages: 12

Brand: SDMO Pages: 66

Brand: U.S. Products Pages: 8

Brand: Powermate Pages: 12

Brand: LIFAN Power USA Pages: 34

MSX+ 152/120 48F SBM-485

Brand: phytron Pages: 66

FG085 Function Generator

Brand: JYE Tech Pages: 2

Brand: Denver Pages: 27

Brand: Zebronics Pages: 7

Brand: P Tec Pages: 38

Brand: MartinLogan Pages: 8

Brand: Coleman Pages: 13

Brand: Coleman Pages: 16

Brand: Cobra Pages: 43

Brand: Vertex Standard Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands