45
If a response is made by pressing the PTT to the call prior to the programmed
call-back time-out, the call will automatically be directed to the originating
unit. If a response is not made before the call-back time-out, the radio will
return to normal receive display, and
*WHC*
will appear on the first line of
the LCD.
To respond after the call-back time-out, press the
key. The radio's display
will show the callers ID on the first line and
WHCI=1
on the second line.
Pressing the PTT button at this point will initiate an individual call back to the
original caller.
The radio stores the IDs of the last 10 callers in the Calls Received List as
shown. Individual calls are stored in the top half of the list (1-10) and Group
calls are stored in the bottom half of the list (1-10). The most recent call is
stored in position 1, the second most recent call is stored in position 2, etc.
Figure 20: Calls Received Lists
To access this list, press the
key twice. Use the
or
buttons
or
buttons to scroll through the list. Pressing the
key will display the
time elapsed since the call was received. After pressing
an example of the
display is as follows:
Figure 21: WHC Individual Call Display
Pressing PTT will initiate an individual call to the displayed logical ID.
Powering the radio OFF and ON will clear this list.
