50
Press
to enter the overdial select/entry mode and follow the selection mode
rules to call up a stored number from the phone list. is displayed. Press PTT
to send the overdial sequence once. If the number needs to be transmitted
again it must be selected or entered again (this prevents unwanted numbers
from being sent the next time the PTT button is pressed during the call). This
overdial select/entry mode remains active until the call is dropped, cleared, or
is pressed. The overdial select/entry mode can be re-entered if the call is
still active by pressing
.
System Model
1.
Follow the procedure in
Sending A Telephone Interconnect Call
(Trunked Mode Only)
to establish a connection to the telephone system
or consult the system administrator for the procedure to access a dial tone
on the trunked or conventional system.
2.
Overdial numbers are transmitted using either method as follows:
This overdial select/entry mode remains active until dropped, cleared, or
is
pressed. The overdial select/entry mode can be re-entered if the call is still
active by pressing
.
PROGRAMMABLE ENTRIES
Pre-Storing Individual and Telephone Interconnect Calls from the
Keypad (System Mode Only)
Individual Call ID numbers, telephone numbers and other number sequences
for overdialing are stored in the special calls lists when programming the
radio. The first ten entry locations of these lists can be changed by the radio
operator. The keypad is used when adding, changing, and storing numbers in
these entry locations.
Use the following procedure to store a number in one of the first ten entries of
a special call list:
1.
Press
or
to enter the individual call list or the phone call list.
is displayed.
2.
Scroll through the list using the
or
until one of the first ten
entries is reached.
NO ENTRY
is displayed if the location is empty.
3.
Enter the desired number. If necessary, a pause can be entered by pressing
and holding 0-9,
, or
until an underscore appears in the display
(telephone interconnect only). The individual call list entries will accept
up to 5 digits. The phone call list entries accept a combination of up to 31
digits and pauses.
