Lynx Mixer Reference
AES16 User Manual
51
2. System Clock Rates
Displays real-time frequency measurements for each of these clock sources.
L/R Clock:
System sample clock
External:
From SYNC IN connector
Header:
From CLOCK IN connector
Lstream:
From LStream port on AES Sync
connector
PCI:
Computer’s PCI Bus speed
3. Digital Inputs
All of the headings except Clock Rate are
merely status indicators showing the status of
the incoming signal sent by each transmitting
device. They do not perform any control or
measurements functions.
Lock
Locked (Green
)
–
Shows the digital receiver
is locked to a valid AES/EBU source.
Unlocked (Grey)
– The digital receiver is not
locked to a valid AES/EBU source. When the
unlocked indicator is shown, all of the fields
to the right will be blank.
Validity
Valid (Green)
–
Indicates Validity of the
incoming AES/EBU signal.
Invalid (Red)
–
The transmitting device has
marked the data stream as invalid. An
example might be a DAT that is hooked up to
the AES16, but is not playing.
Parity
OK (Green)
– Indicates normal operation
with no parity errors.
Error (Red)
– Indicates a Parity error in the
datastream. Most likely a problem with a
transmitting device or bad cable.
CS CRC (Channel Status Cyclic Redundant Check)
OK (Green)
– Indicates normal operation
with no errors in the channel status portion of
the datastream.
Error (Red)
– Indicates an error in the
channel status portion of the datastream. This
could be corruption in the channel stations
portion. It could also mean that the
transmitting device does not indicate a CRC
device.
