Installation
Procedures
AES16 User Manual
22
In a few moments, the “Lynx Two Firmware
Update” dialog box should appear. Confirm
that the correct Lynx Card model appears
under “Model” (please note: pictured below is
the SRC version), and also confirm that the
Firmware Version and New Firmware
Versions are NOT the same.
Select “Update” and click OK when prompted to confirm the Update.
While the firmware updater is programming the on-board flash memory, it is crucial that you do not
power off the computer or interrupt the process in any way.
When the update is complete, you will be prompted to power off the computer.
After shutting down, wait for at least 10 seconds, then power the computer back on.
