47
FAQ and recommendations
When do I need to do a new RoomPerfect™ calibration?
If you change the position of speakers, the crossover settings or if you change your furniture position or
type, you need to do a new calibration, as these changes have an impact on the room acoustics.
What should I set my CD-players sample rate output to?
44.1 kHz. This will allow the ICC feature of the TDAI-2170 to avoid clipping of the signal.
What does the Info button on the remote do?
If you switch to an active audio input and press info on the remote, you will see the following:
Peak Level
This will show you the peak signal relative to 0 dBFS (decibels relative to full scale) and is used for
manually setting up the Input Gain or ICC (Intersample Clipping Correction). If the peak level shows
+3.4, you should set the ICC to -3.4.
Summary of Contents for TDAI-2170
Page 1: ...1 Owner s manual TDAI 2170 ...
Page 4: ...4 What s in the box Microphone stand ...
Page 17: ...17 ...
Page 23: ...23 0 5 m 1 5ft 0 5 m 1 5ft Min 0 5m 1 5ft 1m 3ft ...
