Lyngdorf TDAI-2170 Owner'S Manual Download

Page: 35 / 60

5 Advanced settings

5.1 Auto off

If you don´t press any buttons or audio isn´t being played, this sets the idle time required for automatic

shut-down of the amplifi er.

5.2 Remote control

Activate or deactivate the remote control. This function is useful if you are using a home automation

system and other remotes are using the same IR codes as the TDAI-2170 remote.

A home automation system is connected to the TDAI-2170 through the RS232 connector. Codes are

available for download from www.lyngdorf.com

5.3 ICC

Audio signals that exceed 0 dBFS (decibels relative to full scale) will be clipped when processed in the

audio chain and result in more or less distortion. With ICC (Intersample Clipping Correction) the TDAI-

2170 will dynamically allow for extra headroom to avoid clipping, resulting in the purest sound possible.

ICC (Intersample Clipping Correction) can be set to auto/disabled or manually set to a fi xed level.

Summary of Contents for TDAI-2170





























































Search results

Summary of Contents for TDAI-2170

Reviews:

Related manuals for TDAI-2170

Brands by name

Popular brands

Lyngdorf TDAI-2170, Owner'S Manual

Search results

Summary of Contents for TDAI-2170

Reviews:

Related manuals for TDAI-2170

Brands by name

Popular brands