Lyngdorf TDAI-2170 Owner'S Manual Download | Manualshive

Page: 46 / 60

background image

46

5.9 Software info

Lists the software versions the TDAI-2170 is using. Refer to www.lyngdorf.com for the latest software.

To update the TDAI-2170:

1. Save the new software on the USB drive that came with the TDAI-2170.

2. Insert the USB drive into the “SW Update” connector on the back of the TDAI-2170.

Note: The Lyngdorf logo on the USB drive has to point up.

3. Turn off the TDAI-2170 at the main switch on the back.

4. Hold down the standby button on the front and turn on the main switch on the back.

5. When the display says UPDATING, release the standby button and the TDAI-2170 will update the

software. When the update is fi nished, the amplifi er goes into standby.

5.10 Factory reset

Restores the system to the default factory settings.

Warning

: All user preference settings, system data, and RoomPerfect™

data are lost when restoring to default settings!

«
...
44
45
46
47
48
...
»

Summary of Contents for TDAI-2170





























































Reviews:

No comments

Related manuals for TDAI-2170

Brand: QUAD Pages: 7

Brand: EAW Pages: 2

trans-nova P4000

Brand: Hafler Pages: 2

Brand: JBL Pages: 8

Brand: QRP Labs Pages: 20

Brand: NAD Pages: 2

Brand: CAD Audio Pages: 2

SERVOSTAR 600 Series

Brand: Kollmorgen Seidel Pages: 68

Brand: Blaupunkt Pages: 4

Brand: Key Digital Pages: 1

Brand: Phoenix Gold Pages: 2

Super Blue PB559X

Brand: Pyramid Pages: 12

Brand: SAL Pages: 40

Brand: Harman Kardon Pages: 20

Brand: Ratoc Systems Pages: 29

Brand: Triad Pages: 2

Brand: Focal Pages: 63

Brand: Mofi Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands