Lyngdorf TDAI-2170, Owner'S Manual

Page: 29 / 60

29
A low RoomCorrection fi lter on the focus position could indicate that you have positioned your speakers
in order to optimize the frequency response and not the timing.
Check our guide to speaker positioning and complete a new RoomPerfect™ calibration.
4.2.3 Add focus position
If you would like to add an additional focus position, the chair next to the couch perhaps, it can be done
here. It is possible to have up to 8 different focus positions.
The saved calibration volume from the RoomPerfect™ guided setup is used as a default when adding
extra focus positions. The volume can be changed at any time between measurements to suit a
particular situation. This will not affect the quality of the measurement or the end result.
4.2.4 Add room measurement
It is possible to add more room measurements, which can increase RoomKnowledge and thereby fi ne
tune all the room correction fi lters.