LX Zeus v 3.4.3
10.9.2014
- 30 -
2.1.10.4
Task settings
Start lines/zones, turnpoint zones and finish lines/zones
can be given different default colours from a large palette.
It’s also possible to change their outlines, fills and
outline
widths.
There is a different colour possible for active or
inactive zones.
AAT zones can also show equidistant lines. Equidistant
lines show in AAT zone in which direction you are not
gaining any speed on task.
Default task colours:
Active zone: pink
Active start/finish line: red
Inactive zone: cyan
Inactive start/finish line: teal
Legs yet to cover: royal blue
Active leg: yellow
Covered leg: green
Course to next TP: cyan
Transparency can be set at all colours.
2.1.10.5
Airspaces
User can define colours
and width
of airspace sections
that will meet personal preferences.
Default colours are:
Selected/active airspace: Blue
Controlled area: Red
Prohibited area: Red
All other: Blue
2.1.10.6
Tail settings
Track of last flown minutes and colours of positive, zero
and neutral vario can be defined in this setting
.
Draw tail
for last
is default set to Always.
Vario color coding
setting allows you to enable or disable
color coding. If you disable this function, you can still
choose in which color your track will be shown.
Default vario track colours are:
Negative: Blue
Zero: White
Positive: Red
ENL: Dark grey
The tail will become wider or narrower due to changing
vario values. Default tail width is 2 pixels. For each 1 m/s,
the tail will become wider by 2 px, up to
16 px
(to 5 m/s).