LX Zeus v 3.4.3
10.9.2014
- 77 -
13.2.2.5
Route
Route option is a feature showing the path already flown
and current task, so detours made can be seen.
13.2.3
Special functions
13.2.3.1
Event function
This function is active only if Colibri II is a part of the
system. A long press on
EVENT
button will send a
command to Colibri II flight recorder to activate so called
event function. This is in fact recording in shorter intervals
as default for a limited time (default: event fix interval: 1s;
event repetitions: 20). The conditions are to be set in
Setup/Logger
of Zeus. The action is accompanied with a
clear message.
13.2.3.2
Marker setting
If the pilot wants to mark a position of interest, for example
a suitable outlanding place, thermal hot spot
…), this can
easily be done by activating of
Marker function
. The
process is very
fast and doesn’t intensively occupy the
pilot.
To mark a position pilot should do as follows:
Select screen
TP
, press
Zoom
Select screen button
Add marker.
The marker is visualized as a yellow triangle positioned on
the graphic page. Only one marker can be active at the
same time. To set a new one simple repeat the procedure.
The marker will be stored as user turn point designated as
#MARKER.
If the edit function is used #MARKER can be
converted into normal TP. #MARKER can also be deleted
after using the
Delete TP
command. In case of navigation
data necessity towards #MARKER point, simply select
#MARKER after using of the Select TP command.
NOTE:
Marker function is possible only on TP screen