72
System Configuration
MX6 PPC Reference Guide
E-EQ-MX6PCRG-C-ARC
Config Tab
Access:
Start | Settings | System tab | WLAN Settings | Config tab
Note:
See the following section titled “Creating and Modifying Profiles” for instruction.
Config Screen
Create a Profile Screen
Figure 4-5 WLAN Settings – Config Screen
The Config tab provides a list of all access points and peer stations in range of the MX6 PPC
radio. This configuration tool is used to create and edit SSID profiles for access points that the
user wants their station to associate with.
Preferred Profiles
A list of preferred profiles for access points (AP) in the network created by the user, or added
from the Active SSIDs table is located at the top of the Config window.
When the radio is turned on, it searches for the APs with which to associate in the order of the
listed profiles. For each profile in the table, the user can make changes by using the icon tools at
the top of the table. Tap an icon (New, Edit, Delete, Up, Down) to create a new profile, edit an
existing profile, delete a profile and move the profiles in the Active SSID listing up and down to
adjust the automatic association priority for each profile.
Note: This table is blank after an initial MX6 PPC software installation. It can be kept blank
with no automatic association preference.
