58
System Configuration
MX6 PPC Reference Guide
E-EQ-MX6PCRG-C-ARC
RASMan
Access:
Start | Programs | HHP Utils | RASMan
Help is not available for this option.
Reboot
Access:
Start | Programs | HHP Utils | Reboot
Tap this icon to initiate a Warm or Cold Boot. Tap X to close the decision box.
Warm Boot
(Soft Reset)
A warm boot closes all applications, clears the
working RAM and preserves the file system.
Press the CTRL and SFT keys at the same time for approximately
10 seconds.
Cold Boot
(Hard Reset)
A cold boot forcibly closes all applications, working
RAM and files are cleared and the device’s parameters are reset to
factory defaults (or the last saved registry settings).
Press the CTRL and ESC keys at the same time for approximately
three seconds.
RegBackup
Access:
Start | Programs | HHP Utils | RegBackup
Tap this icon to save the current registry settings to a file.
RegRestore
Access:
Start | Programs | HHP Utils | RegRestore
Tap this icon to restore last saved registry settings to the in-use registry.
ScanWedge
Access:
Start | Programs | HHP Utils | ScanWedge
Note: If you are
NOT
using LXE’s RFTerm application to manage barcode scanning, select
Start | Programs | HHP Utils | ScanWedge
before scanning a barcode.
Tap this icon before scanning a barcode. When the barcode reader program is active, an icon
resembling a barcode is located in the Toolbar.
Suspend
Access:
Start | Programs | HHP Utils | Suspend
Tapping this icon places the device in Suspend mode. Tap the Power key to wake the device.
