LX5000 March 2002
page 18
•
GRAPHIC
•
NMEA
•
PC
•
POLAR
•
LOAD
•
TE COMP.
•
AUDIO
•
INPUT
•
LCD INDICATOR
•
PAGE 1
•
PAGE 3
Editing and adding more pilots „by hand“ is possible by pressing ENTER:
The function
INSERT
allows adding of more pilots (Up to 30). The message Active (upper right corner) indicates that
specific settings of th shown pilot are active (means that this pilot has been chosen in the startup procedure).
Important!
Having entered a new pilot switch the LX5000 off and then on again and chose the desired pilot.
A new entry can also be performed by entering that pilot into the FLIGHT INFO and copying to the pilot list.
3.1.2.7
NMEA
LX5000 delivers position data in the NMEA-format to other navigation devices in the cockpit if necessary.
All NMEA sentences are not active in default settings that means the pilot has to activate them if necessary. Normally
GGA, RMC, and RMB are used. The pilots using
WinPilot
should
activate LXWP_ also.
Please see manual of your
external device for information about the needed protocolls.
The data is available as Tx line on 9P sub D connector marked RS 232, see wiring.
3.1.2.8
PC
The speed of data transfer between LX5000 and other devices (PC, LX 20 or Colibri) can be adjusted in this menu. It is
very important that both devices have the
same communication speed.
The new Windows PC program
Lxe
is able to
adapt the communication speed automatically.
The old DOS programs
(LXGPS and LXFAI) are not able to do that.
