CHECK PROGRAM HEATING TIMES
To enter into this function, follow the below steps:-
• Rotate dial D to the
then slide switch E to then back
to to confirm.
• LED A will stop flashing green and change to solid red or
solid green.
• LED C will be off.
Note:
The time template, located in the rear of the user
manual, will be needed to set the day and time.
• Rotate dial D to the day of the week that is to be
checked.
• Rotate dial B from 00hrs to 24hrs, taking note of at
what time LED A changes between red and green.
Red = Reduced mode
Green = Comfort mode
DEFINE USER PROGRAM HEATING TIMES
Note:
Once saved, the user defined programs are not lost
in the event of a power cut. However, the time will reset
to 00:00 and Day 1 when the power returns, if not set, so
the product may not heat at the expected times.
ATTENTION:
If a user defined program has already been
created and saved, it will be lost as soon as the “define
user program” function is entered.
To enter into this function, follow the steps opposite:-
• Rotate dial D to the
-3,5
then slide switch E to then
back to to confirm.
• LED A will be off.
• LED C will stop flashing green and change to flashing
orange/green, indicating that dial D must now be set to
Day 1.
Note:
The time template, located in the rear of the user
manual, will be needed to set the day and time.
• Rotate dial D to
1
.
• LED A will start flashing red.
• LED C will be off.
• Rotate dial B to the start time of the first comfort period,
then slide switch E to then back to to confirm.
• LED A will change from flashing red to flashing green.
GB
GENERAL
INFORMATION
82
YA
LI C
O
M
FO
RT I
N
ST
A
LL
AT
IO
N AN
D OPER
AT
ING M
A
N
U
A
L
201
8-
02
-01
