GB
GENERAL
INFORMATION
FUNCTIONS AVAILABLE IN THE
PARAMETER MENU
When in the top level of the parameter menu, the below
functions can be accessed:-
Symbol
Parameter Function
No function
Check and set time
Check program heating times
-3,5
Define user program heating times
-5
Select additional features
-10
Select programs
-15
No function
S
Exit parameter menu
Note:
After entering the above functions, if you wish to
return to the top level of the parameter menu, either do
not manipulate any of the controls for 60 seconds, or
follow the below steps:-
• Rotate dial D to
S
.
• LED A & C will both flash orange.
• Slide switch E to then back to to confirm.
• LED A & C will flash green.
CHECK AND SET TIME
To enter into this function, follow the below steps:-
• Rotate dial D to the then slide switch E to then back
to to confirm.
• LED A & C will stop flashing green and change to solid
red or solid green.
Note:
The time template, located in the rear of the user
manual, will be needed to set the day and time.
• Cut out the time template from the manual, and place
it over the control.
CHECKING THE TIME
• Rotate dial B until LED A changes from solid red to solid
green, and rotate dial D until LED C changes from solid
red to solid green.
• In the above example, the time values are Day 2 and the
time is approximately 05:30.
SETTING THE TIME
• To set the time, rotate dial B to the current time and
rotate dial D to the current day of the week.
• Slide switch E to then back to to save the time
setting.
• LED A & C will both change to solid green.
Note:
If power is lost, from a power cut or the product is
switched off, even just for a few seconds, the time and
day setting will be lost.
YA
LI C
O
M
FO
RT I
N
ST
A
LL
AT
IO
N AN
D OPER
AT
ING M
A
N
U
A
L
201
8-
02
-01
YA
LI C
O
M
FO
RT I
N
ST
A
LL
AT
IO
N AN
D OPER
AT
ING M
A
N
U
A
L
201
8-
02
-01
81
