LV switch SIP-T800 User Manual Download Page 72

Page: 72 / 111

SIP-T800 IP Phone User Manual

4. Select the account needs to block, account 1/2/all.
5. Click the

Add

button to save the rule.

- Modify the restriction rules through the web interface

1. Log in to the phone page by IP address.
2. Click

Settings(E)->Dial plan(k)->Block out .

3. Click on the rule to be modified in the list of restricted outgoing rules.
4. Modify the rule in the rule input area, such as: (original: 800 --> changed: 111).
5. Select the account needs to block, acount 1/2/all.
6. Click the

Edit

button to save the modified rule.

Delete the restricted outgoing call rule through the web interface

1. Log in to the phone page by IP address.
2. Click

Settings (E) -> Dial plan(k)->Block out .

3. In the list of restricted outbound rules, click on the rule to be deleted.
4. Click the

Delete

button to delete the rule.

Summary of Contents for SIP-T800
















































































































Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands

LV switch SIP-T800, User Manual

Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands